Page 1 of 1

KB: How to acquire positive films from Epson V700 scanner?

Posted: Wed Jul 23, 2008 2:03 pm
by Alex
You should change the document type to positive film as follows:

Code: Select all

  VSTwain1.StartDevice()
  VSTwain1.OpenDataSource()
  VSTwain1.Capability = 4382     ' 0x111e
  VSTwain1.CapType = 0           ' One value
  VSTwain1.CapValue = 1          ' TWLP_TRANSMISSIVE
  VSTwain1.SetCap()              ' Set cap value
  VSTwain1.Acquire()
This turns on the top light for transparencies or XRays.